
-
A 500W-1000W laser cutting machine needs about 1 cubic meter per minute, 10-13KG compressed air, then it can be equipped with an air compressor of about 7.5KW-11KW. This air compressor needs one hour of operation. The electricity bill is about 5-8 degrees. The maximum electricity consumption for 8 hours a day is 60 degrees. The electricity bill is one yuan and the cost is 60 yuan. It can save half compared to oxygen cutting. The control cost of permanent magnet variable frequency air compressor is about 50 yuan.
-
Elang Machine has customized a matching air compressor for the cutting industry, which can meet the demanding requirements of various laser cutting equipment for water, oil and particles in compressed air. The product adopts five-stage filtration and non-heat regeneration adsorption dryer. Pressure dew point up to -20 ° C ~ 70 ° C.
-
The laser cutting industry uses air compressors to select the main engine, and the key components such as pressure sensors and solenoid valves are imported. The product has high air output, low noise and low vibration; compact structure and convenient maintenance. Reduce the cost of laser cutting and achieve good results.
-
Need to order the laser cutting industry air compressor friends welcome to consult Elang air compressor manufacturers!
- Industrial Air Compressor
- Oil Injected Compressor
- VSD Air Compressor
- Two-stage Screw Compressor
- Oil Free Air Compressor
- Low pressure Compressor
- Customized Air Compressor
- Medium / High Pressure Compressor
- Centrifugal Air Compressor
- Diesel Portable Compressor
- Vacuum Systems
- After Treatment Equipment
- PSA Plant
- Spare Parts
- Air End
- Special Gas Air Compressor
- Elang Compressor