-
Working pressure: 7~13bar 100~190psig Air delivery: 2.5~102m3/min 88~3600cfm Working power: 22~560kw 30~750hp
direct driven -
Working pressure: 7~13bar 100~190psig Air delivery: 0.7~3.8m3/min 25~134cfm Working power: 7.5~22kw 10~30hp
combined -
Working pressure: 6.5~13bar 95~190psig Air delivery: 0.5~102.0m3/min 17.7~3600cfm Working power: 5.5~560kw 7.5~750hp Frequency range: 40%~100%
VSD -
Working pressure: 6.5~13bar 95~190psig Air delivery: 0.5~102.0m3/min 17.7~3600cfm Working power: 5.5~560kw 7.5~750hp Frequency range: 40%~100%
PM -
Working pressure: 4.0~13bar 58~189psig Air delivery: 9.5~61.9m3/min 335.5~2189cfm Working power: 55~315kw 75~420hp
two-stage -
Working pressure: 7~35bar 100~508psig Air delivery: 5.0~37.0m3/min 177~1310cfm Working power: 37~447kw 50~600hp
portable
14 Tips for Compressor Operation
...
14 Tips for Compressor Operation
Feb 14, 2020
1. Do not change the setting values of the exhaust gas thermometer, thermal relay and adjustable differential pressure switch without authorization to prevent malfunction and damage.
2. When the machine is running, the door should be closed tightly. Do not remove all kinds of caps, loosen or disassemble any joint devices, or perform other dangerous operations.
3. Do not run the air compressor above the safe exhaust pressure to prevent the motor from overloading.
4. When the compressor unit is running, do not touch the oil and gas tank, main engine, motor and oil pipe to avoid burns.
5. The cooling device of the air compressor must ensure normal operation.
6. The motor, temperature control meter, electric control box, and wires in the compressor are inspected daily by a special person; the oil and gas separator filter element is replaced once every two months. (Time is for reference only)
7. Before starting up, you must open the oil drain valve to drain the condensate from the body; and determine the interval between draining the condensate according to the actual situation.
8. Before draining condensate, draining and refueling, make sure the system pressure is zero.
9. When the temperature is below zero, it must be ensured that there is no "icing" in the oil cylinder to start the machine. When the temperature is very low in winter, the condensate should be drained after the last shutdown before the temperature of the oil cylinder has dropped to zero.
10. The water-cooled air compressor is shut down in winter, and the water in the cooler must be drained to prevent frost cracking.
11. When servicing the air compressor, you must cut off and lock the power supply, hang a warning sign, release the pressure in the air compressor, and close the shut-off valve to block other air sources.
12. Before dismantling any pressured components, you must confirm that the pressure in the system is zero.
13. Welding is not allowed near the oil system to prevent the lubricant from burning.
14. After maintenance, you must confirm that there are no tools, parts, rags, etc. left in the compressor.
About Elang：
Product Recommendation：
Company News：
-
Wating to meet you in HANNOVER
Date: Apr 4, 2019
-
Why choose us
Date: Apr 19, 2019
-
Global Recruitment Agency
Date: Jul 19, 2019
-
PTC Asia Invitation
Date: Jul 25, 2019
-
How to Choose the Location of the Air Compressor Room?
Date: Aug 19, 2019
-
How to Arrange an Air Compressor Room?
Date: Sep 4, 2019
-
What are The Precautions for The Connecting Pipe of The Air Compressor?
Date: Sep 16, 2019
-
What are The Requirements for Water-Cooling Air Compressors?
Date: Oct 15, 2019
-
How to Ventilate the Air Compressor Room?
Date: Oct 29, 2019
-
What are The precautions for Installing The Main Circuit Cable of The Air Compressor?
Date: Nov 27, 2019
-
Analysis of Gumming and Carbon Deposit in Screw Air Compressor
Date: Dec 9, 2019
-
Advantages of Elang Oil Free Screw Air Compressor
Date: Dec 16, 2019
Previous:
2020 New Year Promotion
